Firebird455,
I don't know if you got your heads back yet, but if you are going with 1.65:1 rockers, make sure that you have the pushrod holes in the heads elongated. If you don't you will have clearance problems with them. I would also recommend the comp cams 995 valve springs.
__________________
469 (455 + .060") with the Edelbrock RAIV cam, Ported 6X-8 heads with 1.77" exhaust valves, 100 cc's, "0" decked block for 9.3:1 static CR, Eagle 1.65:1 roller rockers, Edelbrock RPM manifold and Edelbrock 750 carb., 1.75" x 3.0" Hedman Headers, 2.5" flowmaster exhaust system with "H" pipe and Dynamax super turbo mufflers. 200-4R with a Continental converter, 3.07:1 12 Bolt Saf-T-Trac
|