low compression...8.2-1
holley 750 vacuum secondary
edelbrock performer rpm
400 cu." .30 over 1970 block
new rod and crank bearings
RA IV cam .470/.470
96cc 4X heads w stainless 2.11/1.77 valves
comp cam springs
summit double roller timing chain
152 magnum roller tip rockers
summit lifters and push rods
balanced assembly stock rods/trw forged pistons moly rings
Summit (melling?)high volume oil pump
MSD HEI/ running without vacuum advance
cheap hooker headers into 3" pipes into 2 chamber flowmasters into 3" pipes ending at axle
torque-converter stalls around 2000rpm
t-400 trans w/ trans go shift kit
stock 342 gear posi rearend w/50 series tires
74 formula 400 with black deluxe interior
not exactly the right cam for me but not a slow car either...and very lopey and bassy...
__________________
'74 formula 400, w/shaker (3 scoops) black deluxe interior, '70 406 balanced assembly, .30 trw slugs, moly rings, 4x heads 2.11/1.77 stainless valves, ra 4 cam, e-rpm intake, holley 750 vac. sec, msd hei, hooker headers w/ dual 3'' flowmaster 50 series ending at axle, t400 w/ GM6 convertor, transgo shift kit, b&m starshifter, 3.08 gears, centerlines, 265/50-15 bfg's rear and 235/60-15 front...yes im over cammed but it is still very fun...
|