Not exactly what you have, but...
I recently bought the new 3330cfm Flex-a-lite fan/shroud, for my '67 Firebird. I was able to tie to support brackets in with the two bolts that hold the hood latch to the core support, then run two more supports from the bottom. I had to drill holes in the lower valance/chin spoiler piece to mount the brackets.
The fan came with a selection of brackets, but I had to modify them (drill, bend, cut, & even welded a bit), but think it looks rather decent.
Lee
__________________
'73 T/A (sold). Low budget stock headed 8.3:1 455, 222/242 116lsa .443/.435 cam. FAST Sportsman EFI, 317rwhp/385rwtq on 87 octane. 13.12 @103.2, 1.91 60'.
'67 Firebird [sold], ; 11.27 @ 119.61, 7.167 @ 96.07, with UD 280/280 (108LSA/ 109 ICL)solid cam. [1.537, 7.233 @93.61, 11.46 @ 115.4 w/ old UD 288/296 108 hydraulic cam] Feb '05 HPP, home-ported "16" D-ports, dished pistons (pump gas only), 3.42 gears, 275/60 DR's, 750DP, T2, full exhaust
|