first i built the engine, it has a ram air 3 cam and idles pretty smooth when it's running right. and why not run any fuilds down the carb? i'm not putting enough fast enought to liquid lock it. i built the heads put them togeater so i know they are right i didn't do the guides but i did do the valve grind, set up the spings and everything. i put postive seals on the intake valves which i never do, i usaly use o-rings and umbrellas but the valves i have only have one ring on the end of the valve for the keeper.
i did have one of the rockers come off before so maybe it's coming loose again, like i said it's not hitting on one of them and the intake valve is staying open for alittle while and i'm getting a pop back thur the header on that side, i'll cheack the rockers in the morning and adjust them again, then check compression, i checked it before everything was right around 150 on all, so i'll cheack it again
|