[Robert C.]

New update 02-18-05

We pulled the motor down to check everything out and found the pistons still looked new. The heads chambers look just like we put them on too. Rings and rods and cam ok.


D.O.A. report:

The Eagle crank did not like the horse power at all. After 21 pulls it died. May it rest in peace. It cracked the crank around the main bearing area. All the main bearings look good. I knew that we were at risk using the crank in the motor from the beginning. Racers out there should keep in mind when putting that much Hp on a motor will loose the crank and maybe there car and life.

We were looking to test these heads for fit and function and durability only. And they passed with flying colors. We made good horse power for out of the box.

Now we will put all that we have learned to the production heads and give you a head that will make all of the power that you can use.

This process is called R&D.

AllPontiac is going to make only products that are quality from the start. We will post the complete set up in a few days on our site.

I would like to thank all of you for your input on this and all of our projects.