Ok that is what I figured... Now the next question is how much pressure do I need? Will the m54d have enough pressure for my application? Main clearance is .003 and the rods are .0025. I have the 4.25" stroke with 13.2:1 compression. I have done a search on oil pumps and it seems that everybody has their own idea on what pump to run. All I know is I would rather not contact a bearing. With the oil hot and my current pump I always had 100+psi at 6500rpm. Thanks again
Chad
ND's fastest Pontiac (I think) and Minot's fastest street car (not like that means much)
__________________
3500lb 10.5" tire. [email protected] with a poor 60'
|