I polished the emblems first with a light finishing compound using a q tip to get the tight spots ...then cleaned with laquer thinner......and the did a similar method with the paint ....finishing by wetsanding with a 600 grit sandpaper very lightly on the edges..as for polishing the moldings i also used a 600 grit paper wet sanding(400 in some of the rough areas)..and then polished with the finishing compound..very time comsuming but it turned out great...I also did this off of the car...I suppose it can be done on the car but you may have to visit you local chiropractor after...good luck ...I have a 67 also..
|