hey this is off the subject but how far do you have to mill the 6x-8 head to get 89cc and what has to be done to it ...do you have to mill the intake side too?...putting them on a 455
Grandville455
__________________
Darby
74 Grandville 2Dr 455 c.i 4550#
2011 1.60 60 ft,
[email protected]@117.74
2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft,
[email protected] [email protected]
M/T 275/60 ET SS Drag Radial
2024(Pontiac 505) 1.25 60 ft,
[email protected],
[email protected].... 275/60 Radial Pro's