David, you and I had our cams fail at about the same time, I have been following your roller installation blues. I am very happy you got it straightened out
The lsa on my cam is 112 1/2 degrees, maybe that is why the idle is so smooth. I checked advance curve with my dial back timing light. The advance starts at about 1000 and is all in by 2500. I have a total timing of 34 deg. set right now. It starts fine when cold but bucks when warm. Also with my last cam I had the performer intake and it was no better. The car pulls hard, I just don't have the tire shredding at will
I have to take her to the strip to see what she does in the 1/4. Thanks all for the advice.