I bought my temp sender for my 70 GTO(w/gauges) at napa and it came with the connector to slide a wire into it. I removed the green wire from the 3 prong plug and snapped it into this plug and that was it. I just left the plug with the 2 remaining unused wires aside and will probably end up removing the plug and taping the ends into the harness. Hope this helps some..
GR-RRR!
__________________
1970 GTO 458 CID .040 over 4 Bolt 428 Block, Forged Eagle 455 Crank, 295 CFM SD KRE D-Ports, SD Old Faithful HR Cam + Comp HR Lifters, PPR Maxx-lite rods, Racetec pistons, PRW 1.65 SS Rockers, 900CFM Holley HP TBI, Performer RPM, Hooker Super Comps, 3" X-Pipe into 2.5" mufflers/tailpipes, 2.75 1st TH400, Continental 13" Converter, 8.5" 3.08 Posi.
Everything installed, fired up and tuning has begun!
|