View Single Post
  #34  
Old 05-08-2005, 12:42 PM
Ken K Ken K is offline
Ultimate Warrior
 
Join Date: Mar 2000
Posts: 3,150
Default

Without a part number, I couldn't tell you anything about the springs. The spring charts only use part numbers, not the application. I looked at the spring catalogs at both NAPA and Carquest for a while. They have a part number and a code for the application. If you look up the vehicle. it will give the part number. Some of the rear springs can have the same spring height and use a larger wire diameter, they don't compress as much as the springs with a smaller wire diamter.