I am not an expert so this style of an intake might be worse then stock. I just did what I thought made sense as I do NOT have the correct spacer or carb for this intake. the secondaries on a normal q-jet seem to be bigger then this intake was made for. I have a 1inch spacer that I have sanded to give the correct placement for the carb. the second spacer is a 1/2 inch. I have not ported the intake as I didn't want to make the ports bigger then the head. I don't plan to take the heads off right now to do any work. this is just a fun project I came up with. it was cheap and that is all i can afford right now.
tell me what you think.