A little off subject, but....I am an Electrical Contractor, Commercial/industrial. Today in a span of about 5 minutes I noticed the following: the 2x4 lay-in lt fixtures we rec from Lithonia Lighting were made in Mexico, the recessed can lights we installed came from Korea, and the lamps we installed in them came from Vietnam!! We also use a ton of other stuff from China. The cat is out of the bag. I am as Pariotic as the next guy but if we used all USA stuff we would be out of business!! Just food for thought, FWIW. BTW, actual topic related-LOL, RSB motorsports also sells Scat 4340 H-Beam rods, they are a less expensive alternate to others, come with ARP bolts. Just be sure the machine shop checks them out good, a couple of mine were a little tight and had to be touched up. I would not hesitate to use Scat again. -Jim
|