Quote:
|
Originally Posted by tomtoy
I got a question. I have a 73 firebird and have a shot of getting a column with tilt wheel from a 76, will I be able to swap then with no problems such as the electrical plugs?
|
no, not as far as i can remember.
i tried to swap out a column from a 75 or 76 into a 70 and it didnt fit.
IIRC, it was longer, and it had the wheel cocked 90* out. the rag joint may be able to be rotated that 90* to cure that, im not sure of that is keyed in any way. im still not sure if it will fit properly being longer and all.
the harmonica connector will most likely be different, in terms of wiring. however, that should be "overcome-able" with a schematic and a terminal tool.