Quote:
|
Originally Posted by Puddles the Pontiac
will i be able to use a 4.25" stroke crank with standard length h-beam rods? i understand i may need custom pistons but what issues would come up? i would hate to have to get new rods. thanks for any input.
|
If you are having to buy new pistons just order the compression height you need.
If you already have pistons the difference in deck height will be .020. Depending on your deck height you might be able to get away with going to a thicker gasket. If they are flat-tops it is also a simple matter to deck the piston. The shop i work at charges about $50 for such an opperation