Buy some small paper tags and tie them to any wires or hoses as you disconnect them. Label where they came off of so you'll know where to hook everything back up. You can do the same thing with a roll of masking tape.
Get some small zip lock bags to store nuts & bolts as you remove them and label these as well. Doing this will save you headaches when you go to reinstall eveything.
You probably already know to take the hood off.
If you have a garage, I'd suggest pulling the motor outside to make sure you have enough overhead clearance - unless your ceilings are very high.
I found it was easier to roll the car out from under the hoist once you have the motor up.
Use a load leveler on the motor.
Take your time - safety first.
|