I am rebuilding a '61 389 right now and these are the costs with me doing the disassembly/reassembly and cutting new valve seats using equipment at a tech school here.
Vat block and install cam bearings 80
bore and hone 96
turn crank 60
balance 185
pistons, pins, rings, bearings 505
valves 160
valve spring/retainer set 117
valve keepers 6
rockers 60
push rods 24
lifters 50
cam 80
oil pump 40
timing set 27
freeze/gallery plugs 8
gasket set 100
assembly lube/sealants 10
engine paint 10
shipping 25
total 1643
The prices quoted above are from the current PAW catalog and represent stock replacement components and their brand name products, not high end racing quality components. I am not actually buying all of this as I have collected most of these items over time. I'm using the PAW prices as examples. The machine shop prices are from a shop in SE Texas that will use a Pontiac torque plate when boring the block. The machine shop has been in business over 30 years and has a very good reputation. I called a number of shops and was surprised at their prices; especially the bore and hone price.
Obviously I also have quite an investment in engine building tools that isn't shown, but they will all be available for the next one and all that follow.
|