Ok here are a couple of pics, sorry but I told you the camera was cheap.
The first picture shows the one of the bolts that goes through the bumper bracket and into the shield, there is another bolt higher but I couldn't get in there to get a picture.
The second shows where the shield attaches to the bumper bracket. The arrow shows where the bolt would be if you could see it but it is behind the shield. The "tab" where the two bolts go through the bumber bracket point to the rear of the car. The X shows the bumper bracket. After looking more closely I think I put these on before the bumper because I can't see how you can get to the upper bolt if the bumper is on.
Hope this helps.
__________________
I don't always cross thread the bolt - but when I do I run that bitch in with an impact until it's tight!
|