I 'drilled' the stuck jet out using one of those fluted reverse screw tools.
Tip for anyone else who has a stipped jet to removed - don't use the extraction tools with your drill. The drill just has too much torque and spins too fast for that brass jet. Instead put it on a socket-accepting driver (like the screwdrivers with the ends so you can put on the baby sockets) That way you can push in with as much force as you need while sSLOWLy twisting that strippted jet out.
Also note- i got this spray called B-12 Chemtool Carb/choke cleaner. It works rather well at removing grime that brakekleen and my steam cleaner left behind. However use it outdoors (im an idiot and used it inside for a little bit... D'oh!
|