Fred,
I put a th350 in my 67.As robojo said you'll need a pontiac trans.With the th350,I was able to use the stock drive shaft and left the trans mount in the stock location.I notched my original shifter for 1st gear [I wanted to keep the original shifter]there is plenty of room to do so.You will need a 3 speed shifter cable,the 2sp is too short.Then you need to make or buy a throttle bracket to hold the detent cable.I cut a later bracket and welded to my original. once painted it is hard to notice from original.Then just make sure you have the stud on your carb to hook the detent cable to.
Hope this helps you out.
Greg
|