View Single Post
  #7  
Old 04-14-2006, 12:23 AM
Tripower455's Avatar
Tripower455 Tripower455 is offline
Ultimate Warrior
 
Join Date: Jan 2002
Location: Naples, FL
Posts: 1,500
Default

Quote:
Originally Posted by BILTIT
http://store.summitracing.com/partde...5&autoview=sku

I am going to be installing these, not sure how well they will work but must be an improvement!

I used the same ones between the pump and mounting plate. They helped a little.

I have mine in the same place as Vic. I am going to try some grommets between the plate and the trunk next, but I am putting in a sumped tank, and will try to relocate the pump to the frame rails, which should be a lot quieter due to less resonance.....


BTW, it's not that annoying. The guys in my car club give me a hard time about it, but it really doesn't bother me that much, especially since I don't have any fuel delivery issues at all........

__________________
'66 GTO convertible. 462, KRE 290 cfm Dports, SD "Old Faithful" hydraulic roller, CVM ported aluminum Tripower, TKO600, Moser 12 bolt

"I open up three deuces, I'm Never Coming Back!"



Last edited by Tripower455; 04-14-2006 at 12:33 AM.