View Single Post
  #12  
Old 06-13-2006, 09:21 PM
sixt8bird's Avatar
sixt8bird sixt8bird is offline
Ultimate Warrior
 
Join Date: Jan 2003
Location: Snohomish Washington
Posts: 1,163
Default

400 .030
TRW Forged pistons
Stock rods
Unported #16 heads with quicky 20 minute gasket match.
Stock valves 38 years old.
Full fulcrum Comp 1.65 rockers.
Crane Commander cam 226-234 @114 (same grind as Edelbrock Torker Plus)or real close to Summit's 2802 cam
Street Dominator gasket matched intake.
Holley 800 DP.
Comp 9000 distributer mechanical advance set up at 14 degs initial 35-36 total.
Super Comp 1 3/4 headers with flange gasket matched and tubes at flanges rewelded for smooth flow.
2 1/2" Flowmaster exhaust wit X pipe
TH 350 stock rebuild with Hughes 3,000 converter
1981 8.5 Rear disc with 3:73s
Cal Tracs
275 50 15s Drag radials
1 1/4" front sway bar hooked up, poly bushings
7/8" rear sway bar

Best ET on pump gas 12.60 @ 105.7
Best MPH on pump gas 107.1 @ 12.62
Best 0-60 ft 1.67 seconds
Best Nitrous ET 12.10 @ 112.7
Best nitrous MPH 114.1 @ 112.2 hittig rev limiter hard.