I never get much oil at idle, speed it up past idle and it shoots over the fender
why are you bottoming out the lifter? just go 1/2 turn as you usually do and run it
actually, after 6 years the factory fluid in the lifters might be gummed up, I recently pulled some new PCs off the shelf that were about 5 yrs old and had to pump them with a pushrod in solvent to free the oil passages
On an already running motor I would put a quart of RISLONE in it with new oil and run the crap out of it for a few days. It really cleans out lifters.
|