Are you handy in general? It's not that tough to do, and with time & patience, you can get great results. Others can chime in, but basically, after removing all the surrounding trim, etc, you start with the 3 bow, glue it in the front, then pull it tight working towards the back. You can use a little heat when done to get any wrinkles out, and use a bar of soap to mark the sides as to where to trim the material at the bows. Think several of the 'kits' include instructions, and you can look it up at a book store or online. I'm getting ready to do two of my cars (71 LeMans & 72 442), and plan on taking pics along the way, will post if you like...
|