cam or converter
There is something wrong with my setup. either the cam or the torque convertor must go. The car feels like it is towing another car down the track.The best 60' time is 1.90 it looks like it's in slow motion at the line.
Any ideas?
400 Pontiac bored .030 over
CAT H beam connecting rods
Comp cam solid lift cam 51-000-5
duration @ .050 248 intake 256 exhaust
lift intake .531 lift exhaust .550 lobe separation
108 Intake center line 108
1.5 roller rockers
#13 heads 2.11 1.77 valves
Edelbrock RPM intake 850cfm
Edelbrock carb
MSD billet distributor/ MSD blaster 2 coil
69 TH400 Trans Continental converter 3000 stall 10”
12 bolt rear end Moser axles and spool 3.73 rear gear boxed lower control arm Adjustable upper arms Air bag in right coil Adjustable drag shocks on all Four Corners Moroso Trick springs
M/T slicks 29.5 X 10.5
car weight is 3200lb
Vince
|