Doug,
Finally got a bit of time to browse the threads, the instant e-mail notification does not seem to work for me.
Anyway, I'm currently using a holley bracket that houses both the throttle and TV cable. The bracket only has one mounting point (poor engineering) so I had to tie it down to prevent it from moving front to back eack time I depressed the throttle.
At the carb throttle lever I attempted to use a Holley "corrector bracket" for the proper movment of the cable, but the arc in which the mounting point of the TV cable moved was not in the right relation to the TV plunger in the transmission. I tried to customize it but could never get it right so I made my own, its not pretty but it works pretty well.
Does Demon have a line of bracketry for this type of setup?
I will be e-mailing you regarding another topic.
Thank you.
|