[Greg Reid]

Yeah. My camera is on the blink or I could take a pic of it for you. It goes along the lower rear edge of the wheel house.
David says wheel side and I'm not going to argue that although mine are on the outside of the wheelhouse (cowl side).
At the rear of the wheelhouse, you'll see two holes that are nearly an inch in diameter. That wedge shaped cutout is an opening for the two holes. The lower hole is located near the curved apex of the cutout.
Beyond that, the shield pretty much follows the contour of the lower edge of the wheelhouse with the hole in the apex as the locator.
Don't know if that's clear or not. I'm going to look through my pics. I may have one in the pile that shows it in place.