NO...One mistake. What you have labeled as "inner" is actually the outer. What you've got labeled "Engine compartment" is the outer. The narrow end that you have labeled "Outer" actually terminates at the opening for the upper control arm...Which is where the square shaped splash shield takes up.
Not very much of it hangs down. Maybe 2 to 3 inches in one area, none of it at all in others.
If you get that hole positioned in the cutout properly and get the narrow end in line with the edge of the control arm opening, you'll be in good shape.
__________________
Greg Reid
Palmetto, Georgia
 
Last edited by Greg Reid; 08-21-2006 at 07:51 PM.
|