If you don't have the 8-track mounting bracket that goes underneath the console you can use screws to screw the 8-track brackets
to the console top. If you have the bracket, the bracket screws to the floor
board underneath the console, then you drill holes in the console and the
8-track brackets bolt directly to the lower bracket with the console sandwiched in between. If you don't have the lower bracket and screw the
8-track brackets to the console, you will need to run a ground wire to the upper brackets or the 8-track won't play. The tape player's only ground
from the factory was through the brackets to the floorboard.
|