Well, for future reference, remember that that stuff will stick to rougher surfaces for sure...the rougher the better. From my experiences with it, the more you prep and/or clean a surface prior to coating it, the less it will adhere. I know that sounds bass-ackwards, but thats the conclusion I came to after experimenting with it. For peace of mind, Id suggest you find some scrap steel thats rusting/corroding/flaking in varying degrees, and experiment with it. I did this using a foam brush to slop it on stuff using whatever was leftover in my paint gun, just to see whatd happen lol.
__________________
A friend will help you move...a GOOD friend will help you move a body.
|