If you do the long breaker bar deal and you have the flywheel wedged, BE SURE to pad the area where the breaker bar might travel as I have seen several blots break loose suddenly with the breaker bar doing damage to a body part (Human or sheetmetal). Much easier to do the breaker bar and the starter deal early on in the process. It really doesn't take much of a "TAP" on the starter button to break the bolt loose. Remember the bar goes on top of the frame on the drivers side with no clearance between the bar and frame. You can use wood shims to remove any clearance.
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught
Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
|