View Single Post
  #2  
Old 01-21-2007, 10:54 PM
Skip Fix's Avatar
Skip Fix Skip Fix is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: Katy,TX USA
Posts: 21,708
Default

Here is a Canton F body road race pan. The baffle is not tight at the front and has drainage holes on the side.Yes it moves the pickup more to the middle. But the baffles move the oil on acceleration to the middle, and on braking toward the pickup.
There are 3 trap doors on the areas I added the yellow lines to on the baffling.

It's sump depth at the pump is 7". 10" wide x 10.75 long. The baffles stand 2" from the floor.


The Canton GTO road race is similar in design but is 7 7/8" deep at the pump. 10" widex 8.125 long. The baffle is 3" above the floor.


The Milodon is 7.75 deep at the pump. 10" widex 10" long. The Baffle is 2.75 off the floor.
Attached Thumbnails
Click image for larger version

Name:	Canton.JPG
Views:	669
Size:	182.3 KB
ID:	79971   Click image for larger version

Name:	cantonbaffles.JPG
Views:	621
Size:	193.0 KB
ID:	79972   Click image for larger version

Name:	cantonbafflesaccel.JPG
Views:	612
Size:	60.4 KB
ID:	79973   Click image for larger version

Name:	cantonbafflesbraking.JPG
Views:	603
Size:	59.8 KB
ID:	79974   Click image for larger version

Name:	cantongto.JPG
Views:	610
Size:	51.6 KB
ID:	79975  


The Following User Says Thank You to Skip Fix For This Useful Post: