Quote:
|
Originally Posted by eric65
Thanks for Pix Keith but would like to chime in or hijack .. I have to replace a rocker panel due to looks to be a hit .. Have the rocker already but how eazy or hard is this to replace Is it just looking for all the spot welds and drill drill drill???/// Any tips or inprog pix before that appreciated...
Thanks
Eric
|
That's just about it Eric ,a little with an air sawzall ,a little with an air cutoff tool, what I did was trim off the old rocker down to where you can see the spot weld's ,and then peel off the old metal ,before you remove anything take alot of reference measurement's ,I used my digital cam and the ruler before I dug in ,I'll find some in progress photo's and post for all ,you can see in one of the photo's the brace I welded up ,from both hinge mount's and they both meet at the striker ,this way you are sure the car does'nt flex when you cut out the rocker