I just got an estimate, which is a bit high. Starting with a bare 400 block doing the following
magnaflux
ultrasound
bore/hone
complete roller setup
stroke to 462-468
KRE heads
blueprint
....and so fort
expeting about 450+ hp
complete work, installation and tuning is $9K.
You can go as low as 3-4K or way up like mine, depending on how much power you want and how much work you can do yourslef.
Hope this helps
__________________
Can do the talk, can't do the walk......therefore need deep pockets 
Injection is nice but I rather be blown 
If you got it flaunt it, if not fake it (Snoopy)
Original 1977 Firebird / Welded tube frame connectors
TH350 with shift kit / 400 bored/stroked to 455 by PDude
OCD=Waxing and polishing your oil filter
SICK=wetsanding your exhaust pipe
|