Quote:
|
Originally Posted by form74
I'm having a posi rearened rebuilt and gear changed from a 3.08 to a 3.23, should I have the axle tubes welded to prevent it from twisting behind the new 467 motor.
|
I stitch welded mine first so the tubes did not distort(and sag the punkin) from the heat. Then I welded it all up since the stitches were holding it square to the punkin.
Form74..Be glad to help with other stuff too you may be about to need..
__________________
Nothing is impossible if you break it down into possibilities. It's all a matter of "Want to".