Quote:
|
Originally Posted by 3tas4me
I disagree. I did my 71 T/A front suspension in Polygraphite and I have no complaints about the ride at all. I don't have many miles on the car yet but there is no noise either. The key is to grease the bushings heavily before installing them. The car drives and handles well with P235/60R15 radial tires that I put on. As of now, I would use the poly bushings again on my next one. I don't have any constructive comments for you on the coil overs as I installed AC Delco shocks all the away around on mine.
|
The problem isn't the noise. The noise is a byproduct of the problem, which is binding. Greasing them during install will solve the problem for the short term, but if the bushings don't have any provision to grease them after the install, at regular intervals, they will eventually bind and quickly wear out.
__________________
John
"There are no stupid questions, but there are a LOT of inquisitive idiots!"