man, im having a he!! of a time with the 1/4. i'm at a stand still with the front of the quarter panel where it meets the roof and drip rail. i got most of the drip rail out and removed the upper part of the 1/4 but the peice underneath is giving me hell. so much i cut the roof where it seamed into the 1/4 to try and get better access to it. cant get into it to see well enough for whats holding it there. really starting to pi$$ me off! there is a small section of tim from the 1/4 left at the front of the panel near the window area and the tacked peice under the roof panel. if you 2 could help me on this i'd really appreciate it! next step is cutting the roof or making this a drag car. niether of these are my favorite options! when i do the other side ill cut it below the seam and weld it in as a butt weld!
|