gear change indicator
I found one in a 65 or 66 floor shift car and made it fit. It works fine!!
any engine after 63 will work for this change out. Like I said in the photos, all the stock componants were used, I just had to bend to clearance and make up a longer adjustable shift rod. I don't use a kick down either, because the floor shift works so nice I just shift manually. with 2.56 to 1 in the rear end, the car will go into low with no problems below 50 mph anyway. no worrys
__________________
RDRR Custom Fabrications
....A fictitious company doing fictitious work....
|