Fasteddy- Sure, call me some morning at 512-515-6050. Do note that I use the SCE 128103 intake gasket that is taller than most at 2.320". And I believe the ports are about 1.200" to 1.250" wide x about 2.3125" tall, but this will need to be varified. On back-to-back track testing with my old 450cid combo it ran 10.743 at 126.03 and with the Victor intake it ran 10.685 at 126.61, both using a borrowed 8896HP Dominator carb. Same jetting on both, the HSD was a bit dead out of the hole with a 1.604 60-ft but picked in 2nd gear. The Victor combo had 1.578 60-ft. This was the only time it was on my car and I suspect some "tuning" might help.
|