Robert C or anyone with experience. You mention that with the mid plate you can pull the motor and leave the trans bolted up. Question (maybe a dumb one) I can see the trans pulled and the motor still supported by the locating dowels thru the plate to support the motor. But what do you do when you pull the motor and leave the trans? Is there something I'm not seeing on the plate that remains bolted to the trans once the motor and dowels are removed or are you saying once the motor is removed you then put some bolts back in thru the plate into the trans? Also , are spacers included with the mid plates to relocate the converter due to the thickness of the plate? Just curious, Thanks Mark L
|