View Single Post
  #5  
Old 12-30-2007, 02:12 AM
b-man's Avatar
b-man b-man is offline
Moderator
 
Join Date: Sep 2002
Location: Sunny So Cal
Posts: 17,615
Default

Quote:
Originally Posted by AdamIsAdam
so should I just pull the pan and get a new oil pump (mostly so I know what pump I have since I bought the car assembled)? If so, how do I pull the pan without pulling the motor?

But what I don't understand is why it just happened all of a sudden with the car NOT DRIVEN in weeks. I guess if I have debis, it'll happen any time. Just seems odd.

What about dumping in STP first and running it for 30 minutes or so on highway? Asking for trouble?
Check your pressure with another gauge that's known to be good as Jim Scites has suggested.

If your pressure is still bad, pull the engine and either fix the pressure relief passage blockage in your pump or replace the oil pump.

That pan's not coming off with the engine in the car, you'll have to get the engine halfway out just to get it high enough to get the pan off, so at that juncture removing the engine entirely is practically the same.

Much easier to work on the engine with it on a stand than with the whole car in your way while laying on your back.

Get it out and fix it before you damage it.

Best of luck.

__________________
1964 Tempest Coupe LS3/4L70E/3.42
1964 Le Mans Convertible 421 HO/TH350/3.08
2002 WS6 Convertible LS1/4L60E/3.23
1966 VW Type 2 Single Cab Pickup 140hp 2276
1956 VW Type 2 Panel Van 36hp 1200
1957 VW Type 1 Beetle 180hp 2276