View Single Post
  #4  
Old 02-01-2008, 04:28 PM
455Grandville's Avatar
455Grandville 455Grandville is offline
Ultimate Warrior
 
Join Date: May 2006
Location: The outskirts of Steelville, Mo
Posts: 1,539
Default

Quote:
Originally Posted by Mr. P-Body
Do you have the Lucas or the Roosamaster pump? An '80 model SHOULD be the Lucas. The Lucas is MUCH better and more dependable.

I wouldn't turn the wick up too high on this one, though. The crank/rods/block combo isn't the strongest one I've ever seen... A small turbo might be the ticket.
Lucas; however its a 1984 replacement block, I think in 81 they started drilling and tapping the main bolts deeper and this solved the caps moving (and breaking cranks)
Every 5.7 crank Ive seen was cast .
Somewhere along the lines they went to larger headbolts also.

Quote:
Originally Posted by RAIV55
Another vote to go easy on that one. Crank and block failures were common with those. Cams (pre-rollers) and heads/ head gaskets also were weak spots too. By '82 GM cured most of the issues but then they couldn't give 'em away.
I think I better NOT turn it up, I was considering 10% which is usually 10 % more power. Ive heard the later ones were decent motors, but youre correct by 82 people wouldnt touch 'em and gas prices were back to normal.

__________________
Two 1975 455 Grandvilles &
'79 455 Trans Am
‘69 Camaro SS 396/375 (owned since ‘88)
‘67 Corvette 427/435
‘23 Lexus LS500 awd
‘20 Audi R8 & ‘25 Toyota RAV4 (wife’s cars)
‘95 Ford F250 4wd 7.3 p-stroke
& countless Jeeps & off road vehicles & motorcycles