[JasonD]

Thanks for all the nice comments guys!

Brian......about your body bolts......if you start to loosen a bolt and it feels like it's going to strip out the nut inside the body, stop right there. Use a torch to cut off the head of the bolt. That way when you lift the body up off the frame you can get underneath the body and warm up the nut with a torch and remove the bolt without tearing things up. It may seem like alot of work, but it's WAY easier than trying to fix a caged nut that ripped loose inside a body crossmember.

Keeping the body bushings in while you lower the body down onto the frame is just a matter of being careful. The body bushings should fit tightly into the holes in the frame. Try to let the body straight down onto the frame.