Kip, are you using a griffin radiator in the car? if you are interested in molded rad hoses, here's what i used. upper is for a 71 GTO. i cut some length off both ends to make it to the size i needed. the lower is for a 1969 Chevy Pickup, 307 AT with Air. get it from Carquest or NAPA so it should have the spring in it. (some don't) you'll have to cut it down some to. but they fit nice when done! see the pic of my 63 drag project, BTW it will be getting a dual four offy setup after i dial in the rest of the car!
|