I am going with the XE 256. Max spring height .455 with this cam. I would rather go with the lower lift on my stock springs vs the XE 262 @ .470 max lift. I know the crower I have now (60916) is at .470 max lift, but that is a symetrical cam. The XE's have the asymetrical lobe design. I want to make sure the lifter stays on the cam lobe on each revolution of the cam. I think I would be pushing the stock springs at .470 lift plus the asymetrical lobe with the XE262. No doubt a very good cam and design, if i had better springs I would run it. I think the XE 256 will be fine, strong low and midrange torque. I am glad I posted this as I almost ordered a 2801 from Summit. I think the Comp will also be a better choice. More expensive but worth it. Thanks everyone
|