I thought mine were good too until I started getting rear torque steer when I would get on my engine.
I pulled a upper off and put it in the vise and the arm was very loose and could easily be pulled side to side. I opened up the ploy bushing and it was egg shaped!
I still use polys on my Ram Air Resto rear control arms but with Currie Johnny Joints on the other side of the arm. The Johnny Joint lets the rear end travel through its natural arc. The difference in handling and ride is so fantastic compared to the all poly set up................
Last edited by PITTSBURGH 64; 05-28-2008 at 08:25 AM.
|