Quote:
|
Originally Posted by andrewb70
"With moderate pedal effort my friend was able to generate a fairly easy 800-1000psi at the caliper. By pushing a little harder I am sure that he was going past 1200psi. With all that being said, I think that this MC will work just fine. The pedal effort will be moderate and the braking will be excellent!!!!"...Andrew
|
Andrew,
Let me caution you about the use of galvanized fittings to conduct pressure tests on the brake system. These parts are full of imperfections and are not rated for much over 45 psi safely.
I have seen a number of those fittings fail on the shop compressed air system at a low 165-170 psi.
Best of luck and do be careful...Robert