Quote:
|
Originally Posted by briann
It actually has threads I can see and is thick enough to support threads and a couple bolts I tried started to go and stopped in a turn. I remember taking out the bolts 20 years ago or so when I got rid of the crossflow muffler. No biggie im gonna drill em out and pout some heft bolts in there to hold my fuel pump bracket is all im using it for.
|
Briann, I've got my 74 on a rotisserie now so it was easy to check. I found that the crossflow muffler hanger, tail pipe hangers, drive shaft bumper, front gas tank strap & many or the fluid/vapor line attaching holes are all the same thread. I used a one half inch hex head course thread 1" long pointed tip. What I would call a heavy type sheet metal screw & was able to turn it in with my fingers in all or the afore mentioned screw holes.
__________________
When removing an unreplaceable washer, the part will be heard hitting the floor and then vanish from the face of the earth!