View Single Post
  #14  
Old 05-21-2008, 10:20 PM
formulabird428's Avatar
formulabird428 formulabird428 is offline
Senior Chief
 
Join Date: Mar 2005
Location: NE Ohio
Posts: 465
Default

I've had great success w/575hp and traction.

I use Cal-Tracks setup (the bars, split mono-leaf springs, and shocks). I also have ET streets (28x11.5xR15 w/15lbs pressure), 90/10 shocks on the front w/soft v6 springs, polyurethane bushings everywhere (except on the rear spring, front spring eye, where it's aluminum bushing). The top front control arms are torqued only 75% of standard, and there's no front sway bar.

good luck.

www.formulafirebird.co.nr

for any specs, click on the "engine" section, suspensions' at the bottom.