Well I decided to wire up the relay and after it was all done the relay didn't even work. Went to 3 different places to try and find a new relay part to replace bad one with and none to be found that would match up with it. Since I needed to drive the car this afternoon I took it out and rewired it all with 12 gauge right off the remote solenoid to toggle switch then to pump and a fuse and all is well and fine. Checked for voltage drop test and its fine. Worked fine this wired this way for last 30 years with 14 ga so I'm just leaving it now.
Last edited by briann; 05-25-2008 at 10:48 PM.
|